What does infrared sauna installation involve?
Infrared sauna installation means choosing a prebuilt cabin or a custom room, confirming the space and the electrical supply, assembling or building the unit, and testing the heaters and controls. Through WETYR Pools, a vetted local vendor handles the work and quotes it after a free assessment. Most installed projects in our network fall between $4,800 and $18,500. Prebuilt units are usually finished in 1 to 5 days, while custom builds with electrical work take 2 to 6 weeks. Use the form below or our contact page to request a quote.
Typical infrared sauna installation cost
$4,800 to $18,500 installed. Quoted on site after a free assessment.
How is an infrared sauna different from a traditional sauna?
A traditional Finnish sauna uses a heater and stones to heat the air in the room, and the hot air heats you. An infrared sauna uses panels or emitters that warm your body directly, so the room air stays cooler, typically 110 to 150 degrees Fahrenheit, compared with the higher air temperatures of a traditional room. Because the heaters do not have to bring a whole room of air up to temperature first, infrared rooms generally warm up faster, and many smaller units need less electrical capacity. If you want steam from water poured on hot rocks, compare this page with our traditional sauna installation guide.
What electrical service does an infrared sauna need?
Infrared saunas run on either 120V or 240V power depending on size and heater load. Smaller one and two person cabins are often designed for a 120V household circuit, while larger cabins and custom rooms usually need a dedicated 240V circuit from the main panel. The manufacturer's installation manual sets the exact amperage and circuit requirement, and a licensed electrician should do any new circuit work. Ask your vendor to check panel capacity during the assessment, because a panel upgrade changes both the price and the timeline.
Where can an infrared sauna be installed?
- Indoors: basements, spare rooms, garages, and home gyms all work when the floor is level and the cabin has the clearance the manufacturer specifies.
- Outdoors: choose a unit rated for outdoor use, set it on a level pad, and protect the roof and the electrical connection from weather. See outdoor sauna installation.
- Wellness suites: many owners pair an infrared sauna with a cold plunge or steam room. The wellness suite page covers planning a combined space.
What should you ask before buying an infrared sauna?
- Heater type and coverage: carbon, ceramic, or full spectrum, and how much of the back wall, sides, and legs the panels reach.
- Seating capacity and interior dimensions, measured against the room you actually have.
- Wood species and finish, and whether the unit ships as panels or is built on site.
- Warranty terms on the cabin, heaters, and controls, and who handles warranty service locally.
- Electromagnetic field (EMF) measurements, if low EMF matters to you; ask the manufacturer for its published figures.
Planning to assemble a cabin yourself? Read how to install an infrared sauna first. For an existing unit with a heater, controller, or wiring problem, see sauna repair.
Brands WETYR network installs
FinnleoAlmost HeavenSaunumSun Home SaunasAuroomClearlightSunlightenJNH LifestylesHarvia
Sauna by city
Frequently asked questions
What does infrared sauna installation cost?
Installed infrared sauna projects in the WETYR Pools network typically run $4,800 to $18,500. The low end reflects prebuilt cabins going into a room that already has suitable power. Costs rise with larger or custom rooms, premium heaters and wood, outdoor-rated units, and new 240V circuits or panel upgrades. Your vendor gives a firm price after a free on-site assessment of the space and the electrical service.
Which infrared sauna brands does the WETYR network install?
Vendors in the WETYR network install and service major brands including Sunlighten, Clearlight, JNH Lifestyles, Sun Home Saunas, Finnleo, Almost Heaven, Saunum, Auroom, and Harvia. If you already bought a unit, the vendor can assemble and wire it. If you are still shopping, share the size, budget, and location, and the vendor can talk through which models fit your space.
How long does infrared sauna installation take?
Most prebuilt infrared cabins are installed in 1 to 5 days once the unit is on site, with the time going to assembly, wiring, and testing. Custom builds take longer, typically 2 to 6 weeks, because they can involve framing, interior finish work, and new electrical circuits. Shipping time for the sauna itself is separate, so confirm the delivery date with the manufacturer or vendor.
Can I plug an infrared sauna into a regular outlet?
Some smaller infrared cabins are built to run on a standard 120V household circuit, often a dedicated one, but many larger cabins require a dedicated 240V circuit. Check the manufacturer's installation manual for the exact voltage and amperage before you buy, and do not use an extension cord. If a new circuit is needed, a licensed electrician should install it before the sauna goes into service.
Where does WETYR Pools offer infrared sauna installation?
WETYR Pools arranges sauna installation through vetted local vendors in major US metros, including the cities in the sauna by city directory on this page. Use the quote form with your city and state, the unit you have or want, and where it will go, and WETYR Pools dispatches a vendor who covers your area.
